0Different wine categories create different line requirements, and demand is concentrated in the regions where each drink is produced and consumed. The table below maps common wine types to their typical markets and the filling approach each one needs.
| Wine category | Typical producing / purchasing regions | Line requirement |
|---|---|---|
| Red wine and white wine | France, Italy, Spain, Chile, New Zealand, South Africa, Australia | Vacuum or low-level filling, gentle handling, precise level control |
| Sparkling wine and champagne | France, Italy, Spain, Germany | Isobaric (counter-pressure) filling to retain carbonation |
| Whisky and brandy | United Kingdom, United States, India, France, Japan | Accurate dosing, sealed lines, high-strength alcohol compatibility |
| Vodka and gin | Russia, Poland, Ukraine, Sweden, United States | Flow-meter or piston dosing, filtration-friendly product path |
| Beer and craft beer | Germany, Belgium, United States, United Kingdom, Czech Republic | Isobaric filling with foam control |
| Sake and rice wine | Japan, China, South Korea | Vacuum filling, glass and ceramic bottle handling |
| Baijiu and yellow rice wine | China and Asian markets | Quantitative filling, ceramic and glass bottles, high-speed cartoning |
Regional demand is shifting: emerging markets in Asia and Africa are adding local bottling capacity, while established producers in Europe and the Americas upgrade older lines for speed and consistency. A line specified today should handle the bottle formats your market will use tomorrow.
Exposure during filling changes taste and colour. Vacuum filling and short product paths reduce pickup, while sealed capping keeps the wine stable after the bottle leaves the line.
Still wines need calm, low-turbulence filling. Sparkling wines and beer need counter-pressure to keep CO₂ dissolved—two different machines, not one setting.
Clear glass bottles make every millimetre visible. Consistent liquid level and a clean, drip-free neck are part of the product's shelf appeal.
Round, square and shaped glass bottles, plus ceramic and resin bottles, each need the right guides, capping heads and label stations.
Vacuum filling is the common choice for still wine, rice wine and spirit drinks: it gives accurate level control, handles foam-prone products and works across a wide bottle range. Isobaric (counter-pressure) filling is used when the drink holds gas, because it fills under pressure and preserves carbonation. Servo piston and flow-meter dosing suit high-value spirits where dose accuracy and product traceability matter most. Our vacuum liquid filling line holds ±0.1%–0.5% accuracy and supports bottles from 50 to 2500 ml, with built-in CIP for fast changeovers.
A complete line typically runs: bottle unscrambling → hot steam / water / hot-air washing → filling → capping → labelling → carton packing → palletizing. Below are reference configurations from our installed lines.
| Reference line | Application | Capacity | Container | Key equipment |
|---|---|---|---|---|
| 12000 BPH high-speed line | White wine, yellow rice wine, vinegar, soy sauce | 12000 bottles/h | 250–750 ml glass, shaped bottles | Glass unpiler, steam dryer washer, DGP-36-10 monoblock filler-capper, three-side labeler, cartoner, robot palletizer; 5–8 operators |
| Vacuum liquid filling line | White wine, rice wine, soy sauce, vinegar | Below 2500 BPH | 500–2500 ml glass and plastic | DGP-Z-DL piston filler, G-2B chuck capper, one-room filling and capping, cleaning system |
| Rinsing, filling and capping line | Distilled wine, yellow wine, juice, non-carbonated drinks | Configurable | Glass, ceramic, resin bottles | XP-18 bottle washer, CP-C-18 rotary filler, YG-8B chuck capper, computer metering |
| Recovery bottle filling line | Recycled glass bottles for wine, soy sauce, vinegar | 6000 bottles/h (500 ml) | Recovered glass bottles | XP-18 washer, CP-C-18 rotary filler, SG-6A/8A screw capper, labeler |
Food-grade contact parts — SUS304 as standard, SUS316L available where required.
CIP cleaning — clean-in-place circuits shorten changeovers between wine types.
Sealed filling zones — enclosed design limits oxygen pickup and contamination.
Certified quality systems — TOM holds ISO9001, ISO14001 and OHSAS18001, and lines can support your ISO22000, HACCP and GMP programmes.
Gentle product handling — low-shear flow paths protect aroma, colour and clarity.
Still, sparkling or spirit? Carbonation decides between vacuum and isobaric filling.
Which bottle and closure? Glass, ceramic or resin; screw cap, cork or crown cap.
What output? Bottles per hour today and the volume you expect in three years.
How many wine types? Frequent changes call for faster CIP and tool-free format parts.
Our engineers review your bottle, closure and wine sample, then propose a line sized to your real production—not a catalogue maximum.
Often yes with vacuum filling and recipe control, but the cleaning and level settings must be validated for each product. We confirm this during acceptance testing with your samples.
Yes. Carbonated drinks use an isobaric filling solution that preserves CO₂ and controls foam; we size it to your bottle and output.
Vacuum liquid filling holds ±0.1%–0.5%, and high-speed monoblock lines are confirmed with your actual bottle and wine during testing.
Yes. Our rinsing, filling and capping lines are built for glass, ceramic and resin bottles, including round, square and special shapes.
Yes. TOM provides installation, commissioning and operator training, with spare parts and remote support for overseas customers.
Tell us what you bottle, which market you serve and how many bottles per hour you need. We will propose a wine filling line built around your product—with a clear configuration, verified accuracy and a plan for cleaning and changeover.
Request a quoteView products
Specifically for the agrochemical enterprises to provide the most provincial, most stable, most advanced packaging smart line, and strive to make Tom's products achieve practical, beautiful, humane, stable, thick and solid, humanization, to make due contributions for China and the world's.
E-mail: merry@cn-tom.com
Mobile: 0086-15961418794
Tel: 0086-15961418794
WhatsApp: +86-15961418794
Add: No.99, Rulin Town, Jintan District, Changzhou City, Jiangsu Province, China.